Welcome to the official website of Hangzhou Hesunny Import And Export Co.,Ltd!!!

Current Location:Home > News > Company News > How do we buy LED bulbs in our lives?

How do we buy LED bulbs in our lives?

Source:Hangzhou Hesunny    Hits:     Date:2019.05.10

  1, LED output luminous flux (LM number) is different, the price is different. LEDs used in LED luminaires shall comply with the laser class I standard.

  2, anti-static ability LED anti-static ability, long life, and therefore high price. LEDs with a typical antistatic of more than 700V can be used for LED lighting.

  3. LEDs with good wavelength consistency have the same color. If the color is consistent, the price is high. It is difficult for manufacturers without LED spectrophotometers to produce pure color products.

  4, leakage current

  The LED is a unidirectional conductive illuminator. If there is a reverse current, it is called leakage, and the LED with large leakage current has a short life and a low price.

  5. LEDs with different illumination angles have different illumination angles. Special lighting angle, the price is higher. Such as full diffusing angle, the price is higher.

  6, the life is different, the key to quality is life. Life expectancy is determined by light decay. Low light decay, long life and high price.

  7, the chip

  The illuminants of LEDs are wafers, and the prices of different wafers vary widely. The chips in Japan and the United States are relatively expensive, and the prices of wafers in Taiwan and China are generally lower than those in Japan and the United States (CREE).

  8. Wafer Size The size of the wafer is expressed by the side length. The quality of the large wafer LED is better than that of the small wafer. The price is proportional to the size of the wafer.

  9, colloidal ordinary LED colloid is generally epoxy resin, LED with anti-ultraviolet and fire retardant is more expensive, high-quality outdoor LED lighting should be resistant to UV and fire. Each product will have different designs. Different designs are suitable for different purposes. The reliability design of LED lighting includes: electrical safety, fire safety, environmental safety, mechanical safety, health and safety, and safe use time. From the perspective of electrical safety, it should comply with relevant international and national standards.

  Since LED is a new product, China's national standards lag, but the country provides product qualification tests. LED lighting with international safety certification (such as GS, CE, UL, etc.) and national product quality certificate is expensive, because these products are reliable in safety design. Consumers are paying attention to the authenticity of the certificate. There are not many manufacturers with international safety certification and national product certification.

  From the aspect of health, the price of products designed with non-toxic materials is high, especially for indoor LED lighting. Don't use cheap LED lighting with odor. Only a few LED manufacturers use non-toxic materials to produce. Directly with the nose, the smelly product is much cheaper than the odorless one. Toxins like lead, mercury, and cadmium require professional analysis. From the perspective of applicable environmental safety, there is a reliable dust-proof and moisture-proof design, and the price of LED products with fireproofing, ultraviolet protection and low-temperature cracking is high.

Hangzhou Hesunny Import And Export Co.,Ltd

Legal notice|Privacy Protection|Contact Us|SiteMap

All rights reserved©Hangzhou Hesunny Import And Export Co.,Ltd

黑余额修改器 今天广西快3开奖情况 江苏7位数中3位多少钱 30选5最近一期开奖 免费好用的ps软件 二肖默认论坛discuz 同花顺股票软件 加拿大28是不是骗局 重庆快乐十分开奖查询 炒股软件下载 吉林快三是几分钟开奖 男人炒股亏了一千多万 本人自创一肖公式规律 贵州快3号码和值推荐 宁夏11选5官网查询 股票配资平台是合法的么重生回古代小说 广西快乐双彩24选7走势图